Batteries could rupture or leak, causing fire, injury or stains around them. If the battery fluid gets in an eye, it could cause loss of eyesight. If fluid does enter an eye, wash it out thoroughly with clean water without rubbing the eye and then consult a doctor immediately. If this should happen, wash it off with clean water and then consult a doctor immediately. If the battery fluid leaks, wipe away any fluid on the battery compartment before inserting new batteries. The acid inside the battery could harm skin or clothing.
For more detailed information about disposal of old electrical and electronic equipment, please contact your city office, waste disposal service or the shop where you purchased the equipment. Before connecting and using the unit, please take time to read this manual thoroughly to ensure you understand how to properly set up and connect the CD-RWMKII, as well as the operation of its many useful and convenient functions.
After you have finished reading this manual, please keep it in a safe place for future reference. This product is designed to help you record and reproduce sound works to which you own the copyright, or where you have obtained permission from the copyright holder or the rightful licensor. Unless you own the copyright, or have obtained the appropriate permission from the copyright holder or the rightful licensor, your unauthorized recording, reproduction or distribution thereof may result in severe criminal penalties under copyright laws and international copyright treaties.
If you are uncertain about your rights, contact your legal advisor. CD-R discs can be recorded once only. Once they have been used for recording, they cannot be erased or re-recorded. However, if space is available on the disc, additional material can be recorded.
The pack-aging of CD-R discs will include one of the following logos:. The packaging of CD-RW discs will include the logo one of the following logos:. High Speed. This is in no way a limitation of the CD-RWMKII itself, but of the difference between the different types of media and the methods used to read them.
Recording on a disc requires a cleaner surface than playing back, and fingerprints, grease, etc. Information of recorded data, which contains titles, starting and ending addresses, and etc.. Once this has been done, no further data can be written to the disc. In the case of a. It is important that they are not stored in a location where direct sunlight will fall on them, and which is away from sources of heat such as radiators or heat-generating electrical devices. Never use a ball-point or hard-tipped pen, as this may cause damage to the recorded side.
To clean a disc, wipe gently with a soft dry cloth from the center towards the outside edge. Do not use thinner, gasoline, benzene or LP cleaning fluid, as these will damage the disc and cause the disc unplayable.
This allows further tracks to be recorded to the disc, provided that there is space on the disc. The CD-RWMKII may be used in most areas, but to maintain top performance, and prolong operating life, observe the following environmental conditions:.
Do not install this unit in a confined space such as a bookcase, and do not put anything on top of the unit. The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician. Grime and dust may cause skipping, so keep discs clean and store them in their cases when not being played. To clean the signal side of a disc, wipe gently with a soft dry cloth from the center towards the outside edge. It may cause CDs to become unplayable.
If left in such places, warping could result. Do not write on the disc with a ballpoint pen. If they are inserted into the player, they could stick to the internal mechanism, requiring removal by a technician. Avoid using non-circu- lar promotional, etc. Using commercially available CD stabilizers or printable recordable discs with this player will damage the mechanism and cause it to malfunction. Never use a disc that has had a stabilizer mounted to it. If it sticks to the turntable, you will need a technician to get it out.
If the unit or a compact disc is moved from a cold to a warm place, or used after a sudden temperature change, there is a danger of condensation; vapor in the air could condense on the internal mechanism, making correct operation impossible. To prevent this, or if this occurs, let the player sit for one or two. Long exposure to this light may result in failure of the remote control sensor.
Should leakage occur, remove and discard the batteries, and wipe the battery case thoroughly with a cloth. Avoid getting the battery liquid on the skin. After cleaning, replace with new batteries. Always replace both batteries with new batteries of the same type.
Do not obstruct the path between the remote control and the remote sensor. If batteries are used improperly, or if leakage or breakage occurs, the unit will not function. Please observe the cautions indicated on the batteries and their packaging to ensure proper usage. Do not use batteries of different specifications together.
However, the unit can receive signals from only one digital input at a time. When a disc is loaded into the unit, the display shows TOC Reading for a short period while the unit determines the contents of the disc. The display shows Disc Eject. When the disc is playing or in ready mode, press this key to see the current track title. Make sure that there is a clear path from the remote control unit to the sensor. Adjust the volume from the jack with the level control turn clockwise for higher volume.
When Directory search is on, and when stopped, using this key selects the directory. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. For U. Operation is subject to the following two conditions: 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation.
Remove the feet of the unit before mounting. The label required in this regulation is shown at 1. Laser output: Less than Pb, Hg, Cd e The return and collection systems are available to the end users. Basic recording The warranty is included at the end of this manual. NOTE The voltage supplied to the unit should match the voltage as printed on the rear panel.
Never use a stabilizer or printable discs Using commercially available CD stabilizers or printable recordable discs with this player will damage the mechanism and cause it to malfunction. NOTE Never use a disc that has had a stabilizer mounted to it. Beware of condensation If the unit or a compact disc is moved from a cold to a warm place, or used after a sudden temperature change, there is a danger of condensation; vapor in the air could condense on the internal mechanism, making correct operation impossible.
Batteries If batteries are used improperly, or if leakage or breakage occurs, the unit will not function. Open the lid. Close the lid. The following should be noted when you connect the unit to other equipment. Currently selected input jack is shown on the display. This key also moves the cursor in the left direction when entering TEXT data. This key also moves the cursor in the right direction when entering TEXT data.
You can only view or download manuals with. Sign Up and get 5 for free. Upload your files to the site. You get 1 for each file you add. Get 1 for every time someone downloads your manual.
Buy as many as you need. View and download manuals available only for. Register and get 5 for free. Upload manuals that we do not have and get 1 for each file. Get 1 for every download of your manual.
No preview item for this file. Possible causes: No preview picture generated yet. It is not a pdf file. Please tick the box below to get download link:. For this no need registration. Please take a look at the below related repair forum topics. May be help you to repair.
If you are not familiar with electronics, do not attempt to repair! You could suffer a fatal electrical shock! Instead, contact your nearest service center! Translate this page:.
Hello everyone..
0コメント